(click on images for larger pictures)
 

• Processor
  - Integrated Intel® Atom™ processor 330 Dual Core
  - 1.6 GHz CPU Speed, 533 MHz Front Side Bus (FSB),
  2 x 512 KB L2 Cache
• Chipset
  - Intel® 945GC Express Chipset and
  Intel® I/O Controller Hub 7 (ICH7)
• BIOS
  - 4Mb Flash EEPROM (Custom versions available)
• Memory
  - 2GB DDR2 Ram Standard (MAX)
• Internal Storage
  - Standard 2.5" Extreme Environment Hard Drive
  - HDD Spec: 80GB SATA, 8MB Cache, 5400RPM
  - Operational Specifications of the Hard Drive Only:
  • Temperature: -20C to +75C, RH: 5%-90%
  • Vibration: Up to 2G's from 5-500Hz
  • Shock: 300G's
  • Altitude: non-pressurized up to 5000m or 16,400ft
  • Operational: 24 x 7/ 8760 hours per year
  - Solid State Disk Drives (SSD) available (SLC Base)
• Optical Drives
  - No internal optical drive support
  - Optional External USB DVD/CDRW or CDRW/DVDRW
• Video (Video Resolutions Supported)
  - Onboard Intel® Graphics Media Accelerator 950 (Intel® GMA 950)
  - Intel® 82945GC Express Chipset Graphics Controller
• Networking
  - Onboard 10/100/1000 Gigabit Network Controller,
  Reltek RTL8111C
• Audio
  - No Audio Support
• Operating Systems
  - Supported Operating Systems: Windows Vista 32-Bit/64-Bit,
  Windows XP 32-Bit / 64-Bit, Windows 2000 Pro,
  Windows XPe Embedded, Linux, QNX & embedded.
• Power Management
  - Advanced configuration and power interface V2.0, DMI 2.0
  - Wake-on event
• Chassis Description
  - Rugged Aluminum Chassis w/ mounting bracket
  - Completely Sealed Water, dust & debris Proof enclosure
  - Fanless Design with Heat Pipe Technology
  - Fully IP67/NEMA 6 rated, Highest level for Dust and Water Proof
• Power Input
  - Wide DC input voltage range 10~30VDC
  - Supporting ITPS feature for powerup
  and delayed power down
  - Power configuration is setup as either to power on as soon as
  power is applied, or via ITPS. Must be advised at time of order
• Power Consumption
  Initial Start-up / Power Up: (36W)
  Windows Idle: (28W)
  Full Load: (35W)
• ITPS Function
  The ITPS Function allows users to have a switch installed on the
  ACC line of the power cable. When installed this would wire
  directly into the positive connector of your power supply.
  When the switch is ON, the Power on delay is enabled. When the
  switch is off, the Power off delay is activated.
  - Factory controlled setting to allow delayed power up or power
  down when activated via switch wired into the power input cables
  (Advise at time of order)
  - Click here for ITPS Function Diagram
• Included Accessories
  - Wall Mount Bracket
  - 4-port USB Powered Hub
  - RJ45 Coupler
• Options
  - Solid State Drives (SSD) SATA
  - USB Key (mini-Flash drive) for easy file transfer
  - External USB Optical Drive, DVD/CDRW, CDRW/DVDRW
  - Spare Cables for Video, Lan, USB/Serial and Power
• Complimentary Product Option
  Stealth Model: TT-840, 8.4" Waterproof LCD w/ Touch
• Rear Panel
  - 4 Water Tight Bayonet connections IP67 Rated
  - DC Power In connection (1.5M in length)
  - VGA HD15 Video Cable (1.5M in length)
  - RJ45 Male connection (Comes with Coupler to
  allow Male to Male Connections) (1.5M in length)
  - 1 USB 2.0 and 1 DB9 Serial RS232 Cable (one
  cable to provide both connectors) (1.5M in length)
• Dimensions
  - 7.51"(W) x 11.37"(D) x 2.97"(H)
  (191 x 298 x 75.5 mm)
• Environmental
  - Operating Temperature: 0~40C
  - Non-Operating Temperature (Storage): -20 – 70C
• Weight
  - Unit Weight (w/o cables, mounting bracket): 8 lbs./3.62kgs.
  - Unit Weight (w/ cables, no mounting bracket): 9.75 lbs./4.42kgs.
  - Mounting Bracket Weight: 0.6 lbs./0.28 kgs.
  - Shipping Weight: 13 lbs./5.9kgs.
• Warranty
  - 1 Year

Sealed, Waterproof
 

Wet Shot
 

Mounting Bracket Installed
Front View
 

Mounting Bracket Installed
Top View
 

Rear View with Cables Connected